Extreme performance, full control. Overclock CPU, memory, and bus speeds for optimal performance. Integrated auto-tuning makes system optimization easy while maintaining system stability
System monitoring. Monitor and adjust voltages, temperatures, and fan speeds. Test stability & benchmark performance. Integrated launch points for Passmark BurnInTest* and Passmark PerformanceTest* (compatible with DX38BT, DX48BT2, DP45SG, and DX58SSO)
Burn In Testing :-
Passmark BurnInTest* (32bit)Passmark BurnInTest* (64bit)Passmark PerformanceTest* (32bit)Passmark PerformanceTest* (64bit)
Iometer is an
I/O subsystem measurement and characterization tool for single and clustered
systems. It was originally developed by the Intel Corporation. Iometer is pronounced "eye-OM-i-ter, " to rhyme with "thermometer. " Iometer does for a computer's I/O subsystem what a dynamometer does for an engine: it measures performance under a controlled load. Iometer was formerly known as "Galileo. " Iometer is both a workload generatorIometer is an I/O subsystem measurement and characterization tool for single and
clustered systems. Iometer. The Iometer is both a workload generator (that is, it performs I/O operations in order to stress the system) and a measurement tool (that is, it examines and records the performance of its I/O operations and their impact on the system). It can be configured to emulate the disk or network I/O load of any program or benchmark, or can be used to generate entirely synthetic I/O loads. It can generate and measure loads on single or multiple (networked) systems. Iometer is an I/O subsystem measurement and characterization tool for single and
clustered systems. It can be configured to emulate the disk or network I/O load of any program or benchmark, or can be used to generate entirely synthetic I/O loads. It can generate and measure loads on single or multiple (networked) systems. (that is, it performs I/O operations in order to stress the system) and a measurement tool (that is, it examines and records the performance of its I/O operations and their impact on the system). It can be configured to emulate the disk or network I/O load of any program or benchmark, or can be used to generate entirely synthetic I/O loads. It can generate and measure loads on single or multiple (networked) systems.
UEFI, (User Extendable Framework Interface), a more Graphical BIOS, (Basic Input Output System), more address space in the BIOS to add more features. Safe Automated Over Clocking etc...
J.J., the ASUS Senior Technical Marketing Specialist, to learn about UEFI and try out some overclocking on the new Sandy Bridge platform.
Credits: Camera, Editing: Lam, Talking: Paul, Special Guest: J.J., ASUS Senior Technical Marketing Specialist
WARNING: This is a much longer video than what we usually post! They considered cutting out some of the info, but they decided that this new technology warrants some extended explanation.
ClockGen is an program dedicated to overclocking, (making your CPU run faster than standard SAFE settings).
CPU Speed Professional will accurately benchmark your PC processor speed. Our software records and reviews thousands of processor speeds which are added daily to the worldwide CPU ranking website. Our CPU comparison tables chart and review speeds of each of the different Intel and AMD processors.
Speed Fan Monitor - Freeware SpeedFan monitors fan speeds, temperatures and voltages in computers with hardware monitor chips. It can even access
S.M.A.R.T. info for those hard disks that support this feature and show hard disk temperatures too, if supported. It can even change the FSB on some hardware. At the lowest level, it is a hardware monitor software, but its main feature is that it can control fan speeds according to the temperatures inside your pc, thus reducing noise and power consumption.
HWMonitor is a hardware monitoring program that reads PC systems main health sensors : voltages, temperatures, fans speed.
SiSandra (the System ANalyser, Diagnostic and Reporting Assistant) is an information & diagnostic utility. It should provide most of the information (including undocumented) you need to know about your hardware, software and other devices whether hardware or software. more...
EVEREST cutting-edge benchmarking and diagnostics tool to maximize security, performance, and trouble-shooting capabilities for home and home office PC environments, PC Professionals and consulting firms as well as OEM partners and Configuration Centres worldwide.
OCCT comes from "OverClock Checking Tool". Here is a list of its features:
Up to 16-core support ( for instance, up to a Quad-Kentsfield or an Octo-Conroe )
Customizable tests ( Duration, Priority, CPU or RAM,
CPU and Motherboard detection
Monitoring support through 3rd party application ( i.e. MBM5, Speedfan and Everest Ultimate Edition .50 or above )
Can produce graphs showing temperature and voltages during the test : Unique feature !
Multi-language support
Prime95 has a feature called "Torture Test" that allows maximum stress testing on the CPU and RAM. There are several options allowing the stress test to focus on the memory, processor, or a balance of both. Usually Prime95 will detect an error within a matter of minutes if an overclock is not stable, however many people like to let the system "burn-in" overnight to ensure long-term stability
Intel
Optimized LINPACK Benchmark packages can help you in your quest to obtain
the highest possible benchmark results for Intel® architecture-based systems.
These free packages are implementations of the LINPACK benchmarks which use BLAS
and LAPACK software that has been highly tuned for maximum performance on Intel®
Xeon® processor-based and Itanium®-based systems. These same high performance
BLAS and LAPACK routines are available to software developers in the Intel® Math
Kernel Library.Linpack by Intel(R) is an extremely stressful program that will put even the most powerful X86/X64 CPU in the world at its knees. This is an extremely stressful program that will put even the most powerful X86/X64 CPU in the world at its knees. Load temp under Linpack is
claimed to be up to 22*C higher than the competing software Prime95.
Core Damage is a powerful CPU
stress tester that executes instructions at the maximum possible rate to reduce
idling and increase heat output. This is the fastest and most effective way to
check the cooling system and determine stability of an overclocked CPU under
stressful conditions. Other tools such as Orthos and Prime95 are great for
verifying the accuracy of floating point operations.
Orthos Prime. This is dual-core
prime. It runs one instance, which stresses both cores. Easily-visible test
status. Displays the current status of the app in a large font on an appropriate
background colour. When an error occurs during the test. Will also: flash the
dialog window play a sound named fail.wav or a beep if a WAV file of that name
doesn't exist flash the scroll lock key LED change the app icon from a'dormant
volcano on a sunny day'to an'erupting volcano on an overcast day'A tray icon
displays a tooltip window that shows the current test status Time-related test
status. Displays the test start time and how much time has elapsed. Log window
text that can be copied.
CPU Speed Professional. Test your Intel or AMD processor
speed. This great little application will tell you the REAL speed of your Central Processing Unit (CPU). You can also submit your speed results to the CPU
Speed online WORLD ranking tables and see how your computer compares with others - around the world and in your own country. CPU Speed is the most accurate and
most reliable tool for measuring your computer's speed. CPU Speed Professional records processor speeds from all over the world. You can check your speed score in
the worldwide ranking tables.
eXtreme Power Supply Calculator Many people often overlook the importance of Amperage and its impact on their computers. You can find different types of Power Supplies on the market that supply more then enough Wattage to run your system. However, many of them lack Amperage, which is necessary to back offered Wattage up. Therefore, it is important that you know exactly how many Amperes your system needs in order to work properly, without PSU causing any problems or even damage to computer components.
Lapping a CPU. One of the main purposes of lapping a CPU is to provide a flatter, smother surface so that contact between the CPU and the heartsink is increased allowing for better heat transfer between the heatsnik and the CPU. This may be more important if you are Overclocking. The same may issue apply for other heatsinks, e.g. Graphics Cards.
Also see Mod and Modding.
EVGA Exclusive Precision Overclocking
Utility. This program allows you to fine tune your EVGA graphics card for
the maximum performance possible, with Core/Shader/Memory clock tuning, real
time monitoring support including in-game, Logitech Keyboard LCD Display
support, and compatibility with almost all EVGA graphics cards. More
Graphics Cards links
BenchTec, the home of UK extreme
overclocking and cooling.
This is how I lubricate a computer fan if it's getting a bit noisy.
Sysinternals, (System Internals) host their advanced system utilities and technical information. Whether you’re an IT Pro or a developer, you’ll find Sysinternals utilities to help you manage, troubleshoot and diagnose your Windows systems and applications.
Keep in mind that over clocking may damage your system. Use it at your own risk!
You will also make any warranty's void.
Web Masters.Click Here Now to start making money. A Great opportunity to make some money. Receive
50% by offering your users Ton's of Keywords on
A Great Portal websites. Our Affiliate Program Pays you 50% on Level 1 of Every Sale of our
Text Link both searchable and static Text Link!
A Computer Portal. Freeware, Shareware. Download software. Computer languages and Programming code. Including PERL Scripts and Java Scripts. Webmaster Tools. Internet Marketing, Website promotion.
Hardware Help from BIOS to Windows and UNIX.
